| spotUP |
| Posted: 2006-12-27 03:50:00 |
|
|
Moderator
Posts: 197
Member since:
2006-12-15 18:06:32 |
http://lavaburn.com/files/ahxusersguide-redux-1.0pre2.pdf
written by lavaburn, deltafire and syphus! this applies to hively tracker aswell, so here ya go!
http://www.uprough.net |
| d0pefish |
| Posted: 2006-12-28 01:30:15 |
|
|
Occasional visitor
Posts: 14
Member since:
2006-12-16 16:10:30 |
Thanks for the mention! :)
1.0-pre3 is now out!
http://lavaburn.com/files/ahxusersguide-redux-1.0pre3.pdf
It's the first print and fold version; how I intended it to be in the first place. Contains several tidy-ups and fixes.
You need to print odd pages, then flip the stack and print even pages on the reverse. I can't help with that, just experiment. I'll come up with a printing guide at some stage; I need to test it myself, too - but it's how I do all my manuals. :)
I'll be back later with more info. For now, I'd appreciate further feedback! :)
-d0pefish aka. lavaburn |
| spotUP |
| Posted: 2006-12-28 17:26:51 |
|
|
Moderator
Posts: 197
Member since:
2006-12-15 18:06:32 |
i heard you mentioned doing one for hively aswell, please do! :D
http://www.uprough.net |
| m0d |
| Posted: 2007-01-02 10:24:43 |
|
|
Occasional visitor
Posts: 28
Member since:
2006-12-22 09:27:17 |
I printed mine on a HP duplex printer and it all comes out fine if you set the duplexter to bind at the center of the page (shows a dotted line where the folds will be). Only issue is that there are a couple of (assuming you print this on A4 and fold to A5) double A5 pages together at the front and then again at the back of the manual - no biggie. Useful for notes pages :)
Excellent job and glad I was able to help with some info!
Hip hip horray :D
http://m0d.untergrund.net/ |
| d0pefish |
| Posted: 2007-01-02 19:41:18 |
|
|
Occasional visitor
Posts: 14
Member since:
2006-12-16 16:10:30 |
When I printed and duplexed manually on my ghetto DeskJet Ink-Squirt-O-Matic, I only got blank pages at the very back end of the manual (expected).
Can't guarantee the results with a fancy auto-duplexing printer. ;)
I'm going to wait for other people's printing experiences before I start doing anything drastic with the order/layout.
I know margins might be too close to the paper edge for some printers, I intend to fix that for the next version.
-d0pefish aka. lavaburn |
| syphus |
| Posted: 2007-08-14 20:22:54 |
|
|
Expert at chit-chat
Posts: 122
Member since:
2006-12-14 19:47:57 |
If anyone happens to come back here looking for that, it's now on lavaburn's untergrund account since lavaburn.com has expired:
http://lavaburn.untergrund.net/files/ahxusersguide-redux-1.0pre2.pdf
http://syphus.untergrund.net |
| Xeron |
| Posted: 2007-08-14 22:25:15 |
|
|
Supreme Being
Posts: 448
Member since:
2006-12-13 11:34:00 |
Hmm.. thats not the latest one. There was a pre3 with clarifications for hard cut, release cut and speed multiplier that I sent to lavaburn...
AHX forever! |
| Xeron |
| Posted: 2007-08-14 22:30:42 |
|
|
Supreme Being
Posts: 448
Member since:
2006-12-13 11:34:00 |
Oh.. pre3 is on there:
http://lavaburn.untergrund.net/files/ahxusersguide-redux-1.0pre3.pdf
AHX forever! |
| spotUP |
| Posted: 2007-08-15 19:26:47 |
|
|
Moderator
Posts: 197
Member since:
2006-12-15 18:06:32 |
why not mirror it here?
or even ask mr lava to make one especially for hively?
http://www.uprough.net |
| AceMan |
| Posted: 2007-08-17 07:11:27 |
|
|
Occasional visitor
Posts: 18
Member since:
2007-01-02 21:23:53 |
Kudos for you guys for this amazing guide :)
Thanks to it I managed to make my first AHX tune for Riverwash 2k7 chip compo :)
http://www.modules.pl |
